Colori 2-component heat-resistant coating is a 2-component solvent system paint made from groups of modified Polyester, Acrylic,... with many outstanding features.
After mixing heat-resistant paint with curing according to the manufacturer's prescribed ratio, it can be used to cover many types of material surfaces.
Application:
Can resist heat on many different material surfaces such as: Wood, iron, especially widely used in the field of construction on the surface of plastered walls, concrete, industrial floors, domestic water tanks, swimming pools. wastewater storage,...
Paint for indoor and outdoor products. Products suitable for sea salt environments..
Physical characteristics:
Color: Various colors
Finish: Matte
Mixing ratio: 4-1 (According to volume)
Impact strength 60 kgf.cm
Pencil hardness 2-3H
Thermal shock test H-1012-24 hours at 0 degrees F and 24 hours at 120 degrees F -> 2 rounds: Paint film does not change
Color fastness tested by light: UV ISO 4892-3 cycle 2
Fineness 5-10 μm
Adhesion: Score 0 according to TCVN 2097:2015 standard
Solid content 55-60%
Packaging: 5Kg/set and 20Kg/set (Including Ceramic Component A and Component B divided in a ratio of 4/1.)
Characteristic:
- High adhesion, High hardness 2-3H.
- Has effective anti-fouling and waterproof properties.
- High aesthetics.
- Heavy metals are within allowable limits.
- Colorfast, good abrasion resistance. Good seawater resistance, rust resistance, good heat resistance.
- Heat resistance up to 2000°C. High heat reduction efficiency for roofs, houses and construction works.
- When applying Smart Paint, it helps increase the longevity of construction projects
Safety, Health and Environmental Information:
- Flammable liquid. Do not leave it near high temperatures, sparks or flames.
- On skin contact: May cause moderate skin irritation. Avoid prolonged contact with skin. Use gloves made from materials that are resistant to solvents. Use soap and water to wash away paint stains on the skin.
- When inhaled: Causes irritation to the respiratory system. Use only in well-ventilated area. Avoid inhaling paint dust. Use a respirator with a filter that can filter out organic solvents.
- On eye contact: Causes serious eye irritation and reduced vision. Use goggles that cover both eyes. If paint splashes into your eyes, wash with plenty of water and consult a doctor.
- When swallowed: Very dangerous if swallowed. Keep away from food, drinks and reach of children. If swallowed, see a doctor immediately and bring the paint container or paint label with you.
- In case of spillage, collect with soil or sand or suitable absorbent material. Do not pour paint into drains, ditches or water sources.
- Waste and empty containers should be treated and disposed of in accordance with national and local regulations. Empty containers and other packaging should be remanufactured, recycled or disposed of by appropriate authorities.
Preservation and Storage:
Maximum 24 months. Store in a cool, dry place away from sparks and heat sources.
Do not remove the lid when not in use, place the paint can in an upright position.
Use immediately after removing the lid.
NOTE: The above information applies to products under specified test conditions. Because the conditions and situations in which the product is used are beyond our control, for specific instructions, please contact Colori paint company customer support. We may edit the technical documentation for the product without prior notice.
Surface preparation:
The surface to be painted must be clean, dry, stable and free from dust, oil, grease or other contamination. Surface preparation methods depend on the type of surface and the conditions under which construction is being carried out.
Mix 2 ingredients in the correct ratio by weight: 3/1 (4 parts paint mixed with 1 hardener.)
Recommended paint scheme:
| Paint products used | Number of classes | Dry paint film thickness |
| Multi-purpose Epoxy primer | 1 - 2 | 50 microns/layer |
| Colori 2-component heat-resistant coating | 2 | 50 microns/layer |
Theoretical coverage for recommended film thickness: Theoretical dosage of 250gr/m2 of mixture when painting 3 passes on a horizontal surface.
Dry film thickness: 45-50 μm/1 layer
Note: Theoretical coverage is calculated based on the solid content by volume of the material and is related to the thickness of the paint film applied on the standard surface and does not include loss. Due to environmental conditions, flatness of the surface, geometric structure of the object being painted, skill of the installer, construction method... the actual coverage will be calculated approximately for each case. specifically.
Stir the paint can well and harden before use, avoid the paint settling. Weigh the correct paint and curing ratio. Stir the ingredients together for 3-5 minutes.
Use after 10 minutes.
Usage time: 4 hours.
Many construction methods are possible: using industrial spray guns, regular spray guns, specialized solvent paint rollers, brushes, etc., depending on the technical process on each material surface.
Dilution : Brush & Roller Max 10%
Spraying with air Maximum 20%
Thinning solvent: Colori waterproof paint solvent
Cleaning solvent: Colori waterproof paint solvent
Note: All equipment must be cleaned immediately with solvent after use. Alternative solvents not specified or supplied by Colori Paint Company but used for dilution may seriously affect the product and are automatically not guaranteed or warranted.
Drying Time:
Temperature 10°C 20 °C 30 °C
Dry to the touch 4 hours 3 hours 2 hours
Hard dry 16 hours 12 hours 8 hours
Transition time between 2 coats of paint: Minimum 4 - 8 hours
Environmental conditions during construction:
- Do not construct when humidity is greater than 85%. The temperature of the surface to be painted must be at least 3oC higher than the dew point.
- Do not apply when the ambient temperature is lower than 7°C. Because if applied, the drying time and transition time between coats of paint will be longer.
- Must ensure ventilation during construction, do not use near fire sources and do not smoke.
