Colori 2-component waterproofing primer is a solvent-based, 2-component paint system made from Epoxy - Modified Polyester resin with outstanding waterproofing properties.
After mixing and curing according to the manufacturer's prescribed ratio, it can be used for waterproofing on many surfaces of hygroscopic materials that are in a damp state. The product has high waterproofing ability.
Application:
Colori 2-component waterproofing primer can be waterproofed on many surfaces of hygroscopic materials, especially widely used in the construction field on the surface of plastered walls, walls after plastering, bricks and tiles, Cement tiles, concrete floors... are wet. Applied as a primer for smart paint systems in the construction field.
Physical characteristics:
Color: Opaque white
Finish: Matte
Solid content 35-40%
Flash point: > 42 °C
Packaging: 5Kg and 20Kg boxes (2 components A and B packed in 2/1 ratio)
Characteristic:
- High adhesion, durable color
- Highly resistant to water, alkali, gasoline and abrasion
- Highly waterproof for moisture-absorbent materials.
- Increases the bond between the base material and the primer layer..
Safety, Health and Environmental Information:
- Flammable liquid. Do not leave it near high temperatures, sparks or flames.
- On skin contact: May cause moderate skin irritation. Avoid prolonged contact with skin. Use gloves made from materials that are resistant to solvents. Use soap and water to wash away paint stains on the skin.
- When inhaled: Causes irritation to the respiratory system. Use only in well-ventilated area. Avoid inhaling paint dust. Use a respirator with a filter that can filter out organic solvents.
- On eye contact: Causes serious eye irritation and reduced vision. Use goggles that cover both eyes. If paint splashes into your eyes, wash with plenty of water and consult a doctor.
- When swallowed: Very dangerous if swallowed. Keep away from food, drinks and reach of children. If swallowed, see a doctor immediately and bring the paint container or paint label with you.
- In case of spillage, collect with soil or sand or suitable absorbent material. Do not pour paint into drains, ditches or water sources.
- Waste and empty containers should be treated and disposed of in accordance with national and local regulations. Empty containers and other packaging should be remanufactured, recycled or disposed of by appropriate authorities.
Preservation and Storage:
Maximum 24 months. Store in a cool, dry place away from sparks and heat sources.
Do not remove the lid when not in use, place the paint can in an upright position.
Use immediately after removing the lid.
NOTE: The above information applies to products under specified test conditions. Because the conditions and situations in which the product is used are beyond our control, for specific instructions, please contact Colori paint company customer support. We may edit the technical documentation for the product without prior notice.
Surface preparation:
The surface to be painted must be clean, dry, stable and free from dust, oil, grease or other contamination. Surface preparation methods depend on the type of surface and the conditions under which construction is being carried out.
Mixing ratio (kg): 2/1
Construction time allowed: 2 hours
Recommended paint scheme:
| Paint products used | Number of classes | Dry paint film thickness |
| Colori 2-component waterproof primer | 1 | 50 microns/layer |
| Colori 2-component waterproof coating (according to Colori color chart) |
2 - 3 | 150 micron |
Theoretical coverage for recommended film thickness: 150gr/m2 of mixture when rolled on a horizontal surface
Theoretical coverage = Solid content by volume (%) x 10
(m2 / liter) Dry film thickness (µ)
Actual coverage (20% loss): 180gr/m2 for dry paint film thickness of 150(µ)
Note: Theoretical coverage is calculated based on the solid content by volume of the material and is related to the thickness of the paint film applied on the standard surface and does not include loss. Due to environmental conditions, flatness of the surface, geometric structure of the object being painted, skill of the installer, construction method... the actual coverage will be calculated approximately for each case. specifically.
Rated water permeability 200g/m2 (500±50)kPa, (72±2) hours
Water penetration depth (after maintaining water pressure at 0.5 MPa for 72 hours
Application method: Brush, roller or airless spray gun
Vacuum spray gun (nozzle size: 0.021 ~ 0.023", spray pressure: 100 ~ 150 kg/cm^2).
Dilution : Brush & Roller Max 10%
Spraying with air Maximum 20%
Diluent : Colori Solvent
Sanitary agent: Chlorine Solvent
Note: All equipment must be cleaned with solvent immediately after use. Alternative solvents not specified or supplied by Colori Paint Company but used for dilution may seriously affect the product and are automatically not guaranteed or warranted.
Drying Time:
Drying time at 30 °C: 2 ÷ 4 hours
Complete dry time: 6÷8 hours
Painting time between layers: 2÷4 hours
Time to put into use: 3 days ÷ 5 days
Environmental conditions during construction:
- Do not construct when humidity is greater than 85%. The temperature of the surface to be painted must be at least 3oC higher than the dew point.
- Do not apply when the ambient temperature is lower than 7°C. Because if applied, the drying time and transition time between coats of paint will be longer.
- Must ensure ventilation during construction, do not use near fire sources and do not smoke.
