Alkyd Colori anti-rust primer is a 1-component paint line made from alkyd resin, iron oxide and other additives; Has good adhesion, hard and flexible paint film, good weather resistance, easy to use.
Application:
Alkyd Colori anti-rust primer is used as the first primer layer on non-galvanized iron and steel surfaces. Suitable for use in indoor and outdoor structures.
Physical characteristics:
Color: Gray or reddish brown
Finish: Glossy
Density: 1.00 ± 0.10 depending on color
Packaging: 3 liters, 5 liters and 18 liters
Characteristic:
- Good adhesion
- The paint film is hard and durable
- Good weather resistance
- Easy to use
- Drying time is shorter than other similar paints
Safety, Health and Environmental Information:
- Flammable liquid. Do not leave it near high temperatures, sparks or flames.
- On skin contact: May cause moderate skin irritation. Avoid prolonged contact with skin. Use gloves made from materials that are resistant to solvents. Use soap and water to wash away paint stains on the skin.
- When inhaled: Causes irritation to the respiratory system. Use only in well-ventilated area. Avoid inhaling paint dust. Use a respirator with a filter that can filter out organic solvents.
- On eye contact: Causes serious eye irritation and reduced vision. Use goggles that cover both eyes. If paint splashes into your eyes, wash with plenty of water and consult a doctor.
- When swallowed: Very dangerous if swallowed. Keep away from food, drinks and reach of children. If swallowed, see a doctor immediately and bring the paint container or paint label with you.
- In case of spillage, collect with soil or sand or suitable absorbent material. Do not pour paint into drains, ditches or water sources.
- Waste and empty containers should be treated and disposed of in accordance with national and local regulations. Empty containers and other packaging should be remanufactured, recycled or disposed of by appropriate authorities
Preservation and Storage:
Maximum 24 months. Store in a cool, dry place away from sparks and heat sources.
Do not remove the lid when not in use, place the paint can in an upright position.
Use immediately after removing the lid.
NOTE: The above information applies to products under specified test conditions. Because the conditions and situations in which the product is used are beyond our control, for specific instructions, please contact Colori paint company customer support. We may edit the technical documentation for the product without prior notice.
Surface preparation
The surface to be painted must be clean, dry, stable and free from dust, oil, grease or other contamination. Surface preparation methods depend on the type of surface and the conditions under which construction is being carried out.
Recommended paint scheme:
| Paint products used | Number of classes | Dry paint film thickness |
| Alkyd anti-rust primer (gray, red brown) | 1 - 2 | 50 microns/layer |
| Colori coated alkyd paint (according to Colori color chart or requested color) |
2 | 100 micron |
Theoretical coverage for recommended film thickness: 10 m2/liter (for dry film thickness of 50 microns)
Theoretical coverage = Solid content by volume (%) x 10
(m2 / liter) Dry film thickness (µ)
Actual coverage (20% loss): 8 m2/liter (for dry film thickness of 50 microns)
Note: Theoretical coverage is calculated based on the solid content by volume of the material and is related to the thickness of the paint film applied on the standard surface and does not include loss. Due to environmental conditions, flatness of the surface, geometric structure of the object being painted, skill of the installer, construction method... the actual coverage will be calculated approximately for each case. specifically.
Application method: Brush, roller or airless spray gun
Spray data: Spray with air
Supply pressure (kg/cm2) 3 - 4
Nozzle size at 60 degrees angle 1.3 mm
Dilution : Brush & Roller Max 10%
Spraying with air Maximum 20%
Diluent: Foul oil or A92 gasoline
Cleaning solvent: Foul oil or A92 gasoline
Note: All equipment must be cleaned immediately with gasoline or petroleum jelly after use. Alternative solvents not specified or supplied by Colori Paint Company but used for dilution may seriously affect the product and are automatically not guaranteed or warranted.
Drying Time:
Drying time at 25°C to 30°C:
Surface dry: About 4 hours
Dry to handle: 12 hours
Transition time between 2 coats of paint: Minimum 4-8 hours
Environmental conditions during construction:
- Do not construct when humidity is greater than 85%. The temperature of the surface to be painted must be at least 3oC higher than the dew point.
- Do not apply when the ambient temperature is lower than 7°C. Because if applied, the drying time and transition time between coats of paint will be longer.
- Must ensure ventilation during construction, do not use near fire sources and do not smoke.
