Describe:
Epoxy Colori self-leveling paint (water-based) is a load-bearing self-leveling paint. Dry and harden by interaction between curing agent and resin. The advanced formula of this paint is suitable for floors that are often exposed to chemicals.
When completed, the surface is shiny, seamless, and easy to clean. Available in many colors to choose from.
Application:
Epoxy Colori self-leveling (water-based) coating is used in industrial and commercial applications where it is necessary to be dry, clean and dust-free. Due to its attractiveness it is naturally chemical resistant, waterproof and easy to clean.
Thus making it suitable for use in any factory that requires GMP compliance. Application areas are laboratories, manufacturing plants, clean rooms, hospitals, machine rooms, electronic assembly plants and many other industrial environments.
Physical characteristics:
Color: Color in the Colori paint palette or according to customer's request.
Finish: Super Gloss
Density: 1.25±0.05 kg/liter
Mixture lifetime at 30 °C: 30± 2 minutes
Flash point: > 42 °C
Packaging: 5Kg/set and 20Kg/set (Including Component A and Component B divided in a ratio of 4/1)
Characteristic:
- Hard painted surface withstands heavy travel and light transportation. Dust-free, cleans the paint film surface smoothly, dust-free, eliminates bacteria that develop on matte surfaces and is available in many industrial colors to choose from.
- Chemical resistance resistant to many common industrial chemicals
- No solvents
- Do not allow liquid to penetrate.
Safety, Health and Environmental Information:
1. Flammable liquid. Do not leave it near high temperatures, sparks or flames.
2. On skin contact: May cause moderate skin irritation. Avoid prolonged contact with skin. Use gloves
Made from materials that are resistant to solvents. Use soap and water to wash away paint stains on the skin.
3. When inhaled: Causes irritation to the respiratory system. Use only in well-ventilated area. Avoid inhaling paint dust. Use a respirator with a filter that can filter out organic solvents.
4. Eye contact: Causes serious eye irritation and reduced vision. Use goggles that cover both eyes. If paint splashes into your eyes, wash with plenty of water and consult a doctor.
5. When swallowed: Very dangerous if swallowed. Keep away from food, drinks and reach of children. If swallowed, see a doctor immediately and bring the paint container or paint label with you.
6. In case of spillage, collect with soil or sand or suitable absorbent material. Do not pour paint into drains, ditches or water sources.
7. Waste and empty containers should be handled and disposed of in accordance with national and local regulations. Empty containers and other packaging should be remanufactured, recycled or disposed of by appropriate authorities.
Preservation and Storage:
Maximum 24 months. Store in a cool, dry place away from sparks and heat sources.
Do not remove the lid when not in use, place the paint can in an upright position.
Use immediately after removing the lid.
NOTE: The above information applies to products under specified test conditions. Because the conditions and situations in which the product is used are beyond our control, for specific instructions, please contact Colori paint company customer support. We may edit the technical documentation for the product without prior notice.
Surface preparation:
The surface to be painted must be clean, dry, stable and free from dust, oil, grease or other contamination. Surface preparation methods depend on the type of surface and the conditions under which construction is being carried out.
Mixing ratio 4:1 (4 parts paint mixed with 1 curing agent.)
Recommended paint scheme:
| Paint products used | Number of classes | Dry paint film thickness |
| Colori water-based Epoxy primer | 1 - 2 | 50 microns/layer |
| Colori self-leveling water-based Epoxy Coating (according to Colori color chart or requested color) |
1 | 1000 micron |
Theoretical coverage for recommended film thickness: According to customer's request, minimum 1mm
Theoretical coverage = Solid content by volume (%) x 10
(m2 / liter) Dry paint film thickness (µ)
Paint film thickness 1mm: Norm 1.7kg/m2
Note: Theoretical coverage is calculated based on the solid content by volume of the material and is related to the thickness of the paint film applied on the standard surface and does not include loss. Due to environmental conditions, flatness of the surface, geometric structure of the object being painted, skill of the installer, construction method... the actual coverage will be calculated approximately for each case. specifically.
Construction data:
Construction method: Spiked roller, roller, serrated scraper, nail shoe,...
Dilution: Do not dilute with solvents.
Diluent: Do not dilute with solvent.
Hygiene: Clean water
Note: All equipment must be cleaned immediately with water after use. Alternative solvents not specified or supplied by Colori Paint Company but used for dilution may seriously affect the product and are automatically not guaranteed or warranted.
Drying Time:
Drying time at 30 °C: 8 hours
Complete drying time: 48÷96 hours
Painting time between layers: 12 ÷ 24 hours
Time to put into use: 7 days ÷ 14 days
Environmental conditions during construction:
1. Do not construct when humidity is greater than 85%. The temperature of the surface to be painted must be at least 3°C higher than the dew point.
2. Do not apply when the ambient temperature is lower than 7°C. Because if applied, the drying time and transition time between coats of paint will be longer.
3. Must ensure ventilation during construction, do not use near fire sources and do not smoke.